Skip to content
Carbon EdgeConsulting

Fees

Every published fee, in one place

Section J starts at a published floor and is fixed after the drawings are reviewed. Residential assessment fees are listed by dwelling type. Certificate fees are separate, at cost, with no margin.

Section J

Commercial fit-outs, refurbishments and new buildings. Classes 5, 6, 7b and 9b.

Section J report

From $650

inc GST·per project

A fixed quote is given after the drawings are reviewed. The starting fee is for a straightforward project. A larger floor plate, more than one classification, or an incomplete set is priced before you commit.

Standard turnaround48 to 72 hours from full drawings

Fit-out

From $650 inc GST

A tenancy or floor fit-out in a Class 5, 6, 7b or 9b building, assessed on the work shown in the drawings.

  • Deemed-to-Satisfy check of the fit-out scope on the drawings
  • Lighting, services, and any fabric or glazing inside that scope
  • Compliance summary on the first page, written for the certifier
  • Assumptions and missing information listed in the report
Quote this

Refurbishment

From $650 inc GST

Alterations that go beyond a single tenancy fit-out, including changes to fabric or services.

  • Deemed-to-Satisfy check of the altered parts of the building
  • Fabric, glazing, sealing, lighting and services the drawings change
  • The same compliance summary and assumption list as a fit-out report
  • Coordination of architectural, electrical and mechanical sets where they are provided
Quote this

New building

From $650 inc GST

A new Class 5, 6, 7b or 9b building, assessed across the Section J items the drawings cover.

  • Whole-building Deemed-to-Satisfy Section J assessment
  • Fabric, glazing, sealing, air-conditioning and ventilation, lighting and power
  • Compliance summary a certifier can read before the schedules
  • Construction assumptions the assessment relied on
Quote this

Design-stage advice

Quoted from the drawings

A written note on Deemed-to-Satisfy risks while the design can still change. Not a report for lodgement.

  • Early review of schematic or design-development drawings
  • Plain comments on fabric, glazing, lighting or services choices that may miss Deemed-to-Satisfy
  • Not a compliance report for a certifier to lodge
  • One short follow-up after the note
Quote this

Deposit

A 50% deposit is payable when you accept the quote. The balance is due before the report is released.

Revision

One minor revision is included. A minor revision is a correction, or a small drawing change that does not add scope. A new tenancy, a different classification, or a redesigned façade is quoted again.

NatHERS and BASIX

Our assessment fee, ex GST. NatHERS is available nationally. BASIX is New South Wales only. Standard turnaround is about 2 to 3 business days from complete plans. Priority is +40% on our fee only, rounded to the nearest dollar.

Priority is +40% on our fee only. Certificate fees are unchanged. Figures above are our fee, before GST.

Government certificate fees

Certificate fees are passed through at cost with no margin. NatHERS certificate fees are ex GST, and GST is added. BASIX certificate fees are GST-free. They do not change if you choose priority turnaround.

New South Wales: BASIX and NatHERS

BASIX and NatHERS certificate fees for New South Wales
Dwelling typeBASIX certificate, GST-freeNatHERS certificate, ex GST
Single storey, double storey and granny flat$60$65
Alterations & additions$35$35
Dual occupancy, single or double storey$90$130

Outside New South Wales: NatHERS only

Victoria, Queensland, Western Australia, South Australia, Tasmania, the ACT and the Northern Territory.

NatHERS certificate fees outside New South Wales
Dwelling typeNatHERS certificate, ex GST
Single storey, double storey and granny flat$65
Alterations & additions$35
Dual occupancy, single or double storey$130

How GST is applied

The Section J starting fee is $650 inc GST. That figure includes GST. NatHERS and BASIX assessment fees are shown ex GST. GST (10%) is added to the NatHERS and BASIX assessment fee and to the NatHERS certificate fee. BASIX certificate fees are GST-free. Certificate fees are passed through at cost with no margin.

A New South Wales quote has three lines: our assessment fee, the BASIX certificate fee, and the NatHERS certificate fee. Outside New South Wales the BASIX line is omitted.

Example, New South Wales single storey dwelling at standard turnaround: assessment fee $595 + GST, plus BASIX certificate $60 (GST-free), plus NatHERS certificate $65 + GST.

Payment

A 50% deposit is payable to start. The balance is due on issue of the final certificates. Each residential quote is valid for 30 days from the quote date.

Revisions

One to two minor revisions are included. A major revision is $195 per hour + GST. The hourly rate is $195 per hour + GST.

Design-stage Section J advice does not have a separate published starting fee. It is quoted from the drawings, because it is a short written note rather than a report for lodgement. Questions: andrew.costi@carbonedgeconsulting.com.

Get a fixed quote

Next step

Get a fixed quote before any work starts.

Upload the drawings, or call the number beside the button. The fee comes back in writing. Sending a request does not appoint the practice.